Underfloor heating is turning into increasingly popular. In Scandinavia, around 80 per cent of homes are warmed using this type of heating system, and coverage in the UK can be rising quickly.

In consequence more electricians will be tasked with installing electric underfloor heating. While this may be daunting if it is something you might have by no means achieved before, the installation process is fairly straightforward.

These tips will help you set up the heating system

Check the sub-floor
Earlier than putting in any sort of underfloor heating system, you should check the type of sub-floor the system is to lie on top of.

If there’s a concrete sub-floor, you will need to put insulation board in place, earlier than you lay the heating system.

Without the insulation board, the cold concrete will be heated first, which can dramatically have an effect on the output of the system.

If there’s a timber sub-floor, there will not be the identical sort of have an effect on, but you may want to put tile backer board in place, earlier than laying the heating system.

Ensuring the sub-floor is insulated will assist your underfloor heating system work at maximum efficiency.

Select the system
There are various types of underfloor heating available, and the one that is finest for you will depend on many factors. These embrace the sub-floor, the floor covering and simply personal preference.

You might need to set up an in-screed cable. This is typically installed in new-build homes or extensions, as it housed within the screed – an integral part of the floor.

In fact, this option is not practical if you are putting in the heating system under an current floor.

In this case, you could wish to use a heating mat or a versatile element.

A heating mat is the best alternative when you’ve got tile, stone of slate flooring. It heats up very quickly and the heat transference to these supplies is high.

You probably have laminate or timber flooring, it’s possible you’ll want to consider a versatile heating element. This could be very thin and will be laid directly under the flooring, without elevating the floor.

Set up
While laying the underfloor heating system is pretty simple and may very well be accomplished by anybody with some DIY experience, the ultimate connection should be carried out by a qualified electrician.

They will also be able to approve the set up and, if required, test the system.

As soon as installed, electric underfloor heating needs very little maintenance. There are not any moving parts to corrode – so you should count on a lifespan of between 15 and 30 years.

If you cherished this article and you would like to receive extra details concerning maty grzewcze kindly pay a visit to the site.